UEP-U1-3000 power supply device


UEP-U1-3000

Shield PVRM1-3000 (Dev. 12004-500-00-00) contains:
  • automatic transfer switch (AVR) scheme,
  • inverter bypass circuit,
  • automatic switches,
  • display elements (LEDs, voltmeters),
  • voltage monitoring relay.

On the doors of the PVRM1-3000 panel there are:
  • LEDs indicating operation from feeders,
  • emergency lamp UEP-U1,
  • LED for monitoring the operation of circuit breakers,
  • LED indication of the operating mode with no reserve control circuits,
  • voltmeters measuring feeders voltage and inverter output voltage,
  • button to manually switch the power supply bypassing the inverter,
  • LCD-monitor with a touch panel that provides display of screens of the diagnostic subsystem.
The PVRM1-3000 switchboard is used together with the UAO emergency shutdown device.

Shield PVRM1-3000 allows you to connect two single-phase feeders of external power supply sources to its inputs.

UEP-U1-3000 also have the following versions:

UEP-U1-3000-1
The PVRM1-3000-1 switchboard (dev. 12004-500-00-04) does not have a diagnostics subsystem.
Service life of elements of a board - not less than 15 years.

UEP-U1-3000-2

The PVRM1-3000-2 switchboard (fig. 12004-500-00-05) does not have a diagnostics subsystem, an AKB shutdown circuit to prevent its complete discharge.

Service life of elements of a board - not less than 15 years.


UEP-U1-3000-3
The PVRM1-3000-3 switchboard (Fig. 12004-500-00-06) does not have a diagnostics subsystem, an AKB shutdown circuit to prevent its complete discharge.
Service life of elements of a board - not less than 10 years.

UEP-U1-3000-3S

The diagrams and design of the PVRM1-3000-3S shield (Drawing 12004-500-00-06.01) are similar to those of PVRM1-3000-3. Additionally, the PVRM1-3000-3C switchboard has the ability to supply devices with both voltage of both =12V and =24V DC (from the battery midpoint).