© 2022 JSC "ATIS"
connection methods MPG RV 65-(ххх)-49
Gas fire extinguishing modules type MPG rv 65-(ХХХ)-49 can be used:
-Individually.
(One module - further distribution pipeline)
-In Group.
(From two to four modules - further distribution pipeline)
-Individually.
(One module - further distribution pipeline)
-In Group.
(From two to four modules - further distribution pipeline)
Individual
When using the module individually for connection to the distribution pipeline, the following installation and other products should be used:
•Clamps HKS-357 for attaching the module to the wall;
•High pressure hose RVD 50-60
•Welded sleeve VP RVD 50-pipe Dn 36 (48)
•annunciator pressure SDU-M;
•Clamps HKS-357 for attaching the module to the wall;
•High pressure hose RVD 50-60
•Welded sleeve VP RVD 50-pipe Dn 36 (48)
•annunciator pressure SDU-M;
Group
Group application of modules Modules can be assembled in a group of 2 to 4 pieces and mounted in a mounting rack (SM) or mounted directly to the wall, without a rack. When using a group of modules in a mounting rack (SM), the following mounting and other products should be used:
•mounting rack типа type SM;
When using a group of modules without a mounting rack, the gas manifold - KG, is attached to the wall using a fastener - KKS. For this application, the following installation and other products should be used:
•clamps HKS-357 for attaching modules to the wall;
•high-pressure sleeve RVD 50-600
•gas collector (KG);
•collector fastening on the wall(KKS);
•annunciator pressure SDU-M;
When mounting the collector to a wall, the location of the collector union, module outlets and the allowable bending radius must be taken into account. RVD.
•mounting rack типа type SM;
When using a group of modules without a mounting rack, the gas manifold - KG, is attached to the wall using a fastener - KKS. For this application, the following installation and other products should be used:
•clamps HKS-357 for attaching modules to the wall;
•high-pressure sleeve RVD 50-600
•gas collector (KG);
•collector fastening on the wall(KKS);
•annunciator pressure SDU-M;
When mounting the collector to a wall, the location of the collector union, module outlets and the allowable bending radius must be taken into account. RVD.